Camp Camper Van Interior Clean Station kit aluminum extrusion t-slot

Description

Why spend A LOT of time and energy designing a Camp Van build when these kits are virtually 'plug&play'? We take the guess work out so you can hit the road ASAP :)
Please note:
1) These are "kits", so to price them as low as possible (save on shipping $, etc)
Assembly
is
Required
. All pieces delivered pre-cut, so v
ery similar to assembling Ikea  furniture anyone can do it
(approx. time 1 to
2 hours depending on kit)
​
2) The units
must
be
bolted
to
the
body
so as to be
safe
(pre-drilled holes and hardware and detailed instructions to do so included)
Feature:
Please note:
this kit requires
drilling
four (4) 3/16" holes through metal sink in order to connect to the frame (drill bit not included; but 4 mounting bolts are
, as well as detailed instructions where to mark for holes before drilling it's easy to do:
)
Constructed of durable, light-weight anodized 20 series (20mm x 20mm) aluminum  extrusion 'T-slot' (
*assembly required
just tightening hex bolts it's easy)
Pre-drilled bottom mounting holes (
*proper installation to bolt kit to vehicle body is required for
safety
)
Dimensions
= 15" W  x 15" deep x ~32" tall (*
custom heights
may be available please
contact
us)
Weight
just the 2020 frame completely assembled = approx. 8 lbs.
This sink kit fits a 15x15" bar sink (*sink sold separately; CVK.com recommends the
Houzer 1515- 6BS-1
pictured; and one of the 2 faucet holes can be plugged with a standard 1.5" plug if buyer decides to use a single lever faucet; CVK.com not responsible for fitment issues if buyer selects  a different sink
)
We recommend using either the 5 gallon
'Scepter'
or
USGI
both will fit (water jug(s) not included)
A suggested configuration is to use two jugs one for fresh water and one for grey water after cleaning in sink (or clean water from a larger holding tank if you so choose and both jugs for grey water alternating?)
Banjo Camlock
disconnects and
adapter
can make connecting fast and easy, and
pressure tight hose from your local hardware store and poly irrigation barb with
either a
12v pump
or
foot pump
to pump clean water into the sink
(here's a
video
how camlocks work)  then swap connector
to drain grey water into 2nd jug
Or least expensive just flex tube (will only work for gravity drain not
pressurized
pump clean water to sink)
Google 'DIY' different van sink options lots of resources out there
What you get:
Aluminum extrusion 20 series
needed to assemble a complete kit
frame
(*shipped separately directly from supplier)
All T-slot bolts/nuts/lock washers and allen wrench
Detailed instructions
What you need:
Power drill
and 3/16" bit to drill 4 holes in sink to connect
15x15 sink (again, we recommend
the
Houzer 1515- 6BS-1
pictured)
Faucet and
sink drain
Water jug(s) for both clean and grey water, and connectors (*please dispose of grey water responsibly)
Optional to install sound dampening rubber between kit and floor -buyer's choice - but we recommend it
Buyers can measure and purchase either ABS panels or particle board locally (too cost prohibitive to ship costs more than the material itself in some cases) or hang cloth to cover sides if you prefer
Have any questions or want more info? Please contact us. We do our best to respond within 1 business day, thanks.
*
By purchasing I hereby agree to confirm the kit will fit my van before purchasing, and follow all assembly and installation instructions.
see our site for more info