Folding Bag Sports Camp Chair Replacement Repair Feet Universal .7" OD Tube

Description

Repair Your Favorite Folding Bag Chair
If there is a favorite bag chair you can't use because one or more of the feet is broken, then repair it with these 3D PETG printed replacement feet. They are designed to be used on any of the four sides (see the images on how to orient them at each location). Each replacement foot includes:
One replacement foot designed for chairs
whose metal frame tubes have a .7" nominal OD
Two 8-32 1-1/4" bolts
Two 8-32 self locking hex nuts
These will only work if the existing frame tubes are not broken or bent, and you'll need to reuse the screws attaching the upright tubes to the rear feet. Each replacement foot is 3D printed with high quality PETG filament. While generally stronger than the originals they will break if undue force is applied, but the great news is, should they break, it will be easy to replace them. Due to the high initial cost of mailing ordering more than 1 at a time will save on the shipping costs.
IMPORTANT:
Please look closely at the pictures with the listing. If the legs (tubes) are placed on the wrong side of the tabs it will cause them to break. If you look at the how the legs cross, one in front of the other. The leg in front must be on the outside of the tab, and the other leg (the one that crosses behind) must be on the inside of the tab. Do not over tighten the legs to the tabs.
These are for regular chairs (.7" OD tubes). For heavy duty chairs (.875" OD tubes) see listing #
324656744532