Onkyo TXNR575 7.2 Channel 170W Receiver. Black. Used. Bundled with remote

Description

Remote included.
Local pickup available in NYC.
Specification from product website:
Amplifier Section
Rated Output Power (FTC) (North American):
With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
Surround Mode Output Power (＊):
(6 ohms, 1 kHz THD 0.9%) 140 W per channel
＊Reference output for each speakers.
Depending on the source and the listening mode settings, there may be no sound output.
Maximum Effective Output Power (JEITA) (North American):
7 ch × 170 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD
Dynamic Power (＊):
IEC60268-Short-term maximum output power
160 W (3 Ω, Front)
125 W (4 Ω, Front)
85 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise):
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz 100 W/8 Ω):
200 mV/47 kΩ (LINE (Unbalance))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance:
1 V/470 Ω (SUBWOOFER PRE OUT)
200 mV/2.3 kΩ (ZONE LINE OUT)
Phono Overload:
70 mV (MM 1 kHz 0.5%)
Frequency Response:
10 Hz - 100 kHz/+1 dB, –3 dB (Direct)
Tone Control Characteristics:
±10 dB, 90 Hz (BASS)
±10 dB, 7.5 kHz (TREBLE)
Signal to Noise Ratio:
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance:
4 Ω - 16 Ω
Headphone Output Impedance:
330 Ω
Headphone Rated Output:
80 mW (32 Ω, 1 kHz, 10% THD)
Video Section
Signal level:
1 Vp-p/75 Ω (Composite Video)
1 Vp-p/75 Ω (Component Video Y)
0.7 Vp-p/75 Ω (Component Video B/R)
Maximum resolution supported by component video:
480i/576i
Tuner Section
FM Tuning Frequency Range:
87.5 MHz - 107.9 MHz
AM Tuning Frequency Range:
530 kHz - 1710 kHz
Preset Channel:
40
Network Section
Ethernet LAN:
10BASE-T/100BASE-TX
Wireless LAN:
IEEE 802.11 a/b/g/n standard,
(Wi-Fi® standard),
5 GHz/2.4 GHz band
BlueTooth Section
Communication system:
BLUETOOTH Specification version 4.1+LE
Frequency band:
2.4 GHz band
Modulation method:
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles:
A2DP 1.2,
AVRCP 1.3,
HOGP-Host (Client),
HOGP-HID Device (Server),
HID Service (HIDS)
Supported Codecs:
SBC,
AAC
Transmission range (A2DP):
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range:
Line of sight approx. 15 m (＊)
＊The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
General Section
Power Supply: AC 120 V, 60 Hz
Power Consumption: 460 W, 0.15 W (Stand-by), 55 W (No-sound), 5.5 W (HDMI Standby Through), 2.6 W (Network Standby)
Dimensions (W × H × D): 435 mm × 173.5 mm × 378 mm, 17-1/8" × 6-13/16" × 14-7/8"
Weight: 9.4 kg (20.7 lbs.)
HDMI
Input:
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STRM BOX), IN4 (GAME), IN5 (PC), IN6
Output:
OUT
Supported:
Deep Color, x.v.Color™, LipSync, Audio Return Channel, 3D, 4K 60 Hz, CEC, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content Type, HDR
Audio Format:
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS-HD Express, DSD, PCM
Maximum Video Resolution:
4k 60 Hz (YCbCr 4:4:4)
Video Inputs
Component:
IN1 (BD/DVD), IN2 (GAME)
Composite:
IN1 (CBL/SAT), IN2 (STRM BOX)
Compatible Input Resolutions
HDMI input:
4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p
Component input:
480i/576i
Composite input:
480i/576i
The output from the HDMI OUT jack to the TV is the same resolution as the input.
Audio Inputs
Digital:
OPTICAL 1 (CD), 2 (TV),
COAXIAL (BD/DVD)
Analog:
BD/DVD, CBL/SAT, GAME, STRM BOX, CD, TV, PHONO, AUX (front)
Audio Outputs
Analog: ZONE2 LINE OUT, 2 SUBWOOFER PRE OUT
Speaker Outputs: FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK or HEIGHT L/R, ZONE2 L/R
(Banana plug ready)
Phones: PHONES (Front, ø 6.3 mm, 1/4")
Other
Setup Mic : 1 (Front)
USB : 1 (Ver. 2.0, 5 V/1 A)
Ethernet : 1
Power Consumption in Standby Mode
In the following cases, the power consumption in standby mode may reach up to a maximum of 12 W:
–When "Network Standby" is set to "On"
–When "HDMI CEC" is set to "On"
–When "HDMI Standby Through" is set to other than "Off"
–When "Bluetooth Wakeup" is set to "On"
–When "USB Power Out at Standby" is set to "On"